KB AM03 2AI 1AO Analog I/O Signal Board

Description

KB AM03 PLC signal board with two voltage or current inputs, one voltage and current output, and SB CM01 configuration.

The KB AM03 analog I/O signal board helps a PLC system handle both incoming and outgoing analog signals in one board. It provides two analog input channels that support voltage or current signals, plus one analog output channel supporting voltage and current signals. Configure the board as SB CM01 to access the specified input and output word registers.

Technical Specifications

What Does This Signal Board Do?

The KB AM03 signal board adds two analog input channels and one analog output channel to a compatible PLC configuration. It allows the PLC to read connected voltage or current signals through IW600 and IW602, while providing an analog output value through QW600.

Key Features

• 2 analog inputs — receives two voltage or current input signals.
• 1 analog output — provides one output channel supporting voltage and current signals.
• Combined analog I/O — handles analog input and output functions on one signal board.
• SB CM01 configuration — configure the board as SB CM01.
• Input register mapping — analog input values are mapped to IW600 and IW602.
• Output register mapping — the analog output channel is mapped to QW600.

Compatible With

• SB CM01 configuration selection
• Voltage analog signal sources
• Current analog signal sources
• Voltage analog output circuits
• Current analog output circuits

Easy to Set Up

Configure the KB AM03 signal board as SB CM01 in the PLC configuration. Connect the required analog input and output wiring, then access the two input channels through IW600 and IW602. Use QW600 for the analog output channel.

Order With Confidence

Check the required analog input signal type, analog output requirement, and register mapping before ordering. Confirm that your PLC configuration uses SB CM01. Contact us before ordering if you have compatibility questions.